USB RS232 adapter-usb serial cable

About PL2303TA
PL2303TA   USB to Serial Bridge Controller

PL2303TA provides a convenient solution for connecting an RS232-like full-duplex asynchronous serial device to any Universal Serial Bus (USB) capable host. PL2303TA highly compatible drivers could simulate the traditional COM port on most operating systems allowing the existing applications based on COM port to easily migrate and be made USB ready without having to rewrite the COM port software application.By taking advantage of USB bulk transfer mode, large data buffers, and automatic flow control, PL2303TA is capable of achieving higher throughput compared to traditional UART (Universal Asynchronous Receiver Transmitter) ports.When real RS232 signaling is not required, baud rate higher than 115200 bps could be used for even higher performance. The flexible baud rate generator of PL2303TA could be programmed to generate any rate between 75 bps and 6M bps.

PL2303TA is exclusively designed for mobile and embedded solutions in mind, providing a small footprint that could easily fit in to any connectors and handheld devices. With very small power consumption in either operating or suspend mode,PL2303TA is perfect for bus powered operation with plenty of power left for the attached devices. Flexible signal level requirement on the RS232-like serial port side also allows PL2303TA to connect directly to any 3.3V~1.8V range devices.

Product Applications:

    Single-chip upgrade solution for Legacy RS232 devices to USB interface
    USB to RS232 converters/cables/dongles
    Healthcare/Medical USB Interface Data Transfer Cable
    Personal Infotainment/Media Player Docking USB Interface
    Cellular/PDA USB Interface Data Transfer Cable
    Serial-over-IP Wireless Solution
    USB Barcode/Smart Card Readers
    GPS/Navigation USB Interface
    Point-of-Sale (POS) Terminals/Printers
    PC Docking Station/Port Replicators
    Industrial/Instrumentation/Automation Control USB Interface
    USB Modem/Wireless/Zigbee USB Interface
    Set-Top Box (STB) / Home Gateway USB Interface
    BatteryCharger Application
    MCU-based devices to USB interface

Windows Driver Installer Setup Program
(For PL2303 HXA, XA, HXD, EA, RA, SA, TA, TB versions)
Installer version & Build date: 1.9.0 (2013-10-25)
Windows XP (32 & 64-bit) WDM WHQL Driver: v2.1.51.238 (10/22/2013)
    - Windows XP Certified WHQL Driver
    - Compatible with Windows 2000SP4 & Server2003
Windows Vista/7/8/8.1 (32 & 64-bit) WDF WHQL Driver: v3.4.62.293 (10/17/2013)
   - Windows Vista, 7, 8, 8.1 Certified WHQL Driver
   - Compatible with Windows Server2008/Server2008R2/Server2012
   - Driver can auto-download via Windows Update (for Windows Vista, 7, 8, 8.1)

Installer Language Support: English (default), Chinese (Traditional and Simplified), Japanese
For Prolific USB VID_067B&PID_2303 and PID_2304 Only
Includes Certification Report, User Manual & CheckChipVersion Tool

NOTE:

    Windows 8/8.1 are NOT supported in PL-2303HXA and PL-2303X EOL chip versions.
    Run PL2303 CheckChipVersion tool program in Windows XP/Vista/7 to check chip version.
    Windows 98 and Windows ME driver support is discontinued and is no longer provided.
    Prolific recommends to use PL-2303HXD (HX Rev D) or PL2303TA chip.

浏览 (205) | 评论 (0) | 评分(0) | 支持(0) | 反对(0) | 产品发布：管理员

将本产品加入收藏